Specifications - Sony KDL-19M4000 Service Manual

Power Requirements
120V - 240V AC, 50/60Hz
VIDEO (IN) 1/2
S Video (4-Pin Mini DIN) (Video 2 only)
Y: 1.0 Vp-p, 75 ohms unbalanced, sync negative
C: 0.286 Vp-p (Burst signal), 75 ohms
Video
1.0 Vp-p, 75 ohms unbalanced, sync negative
Audio
500 mVrms (100% modulation)
Impedance:47 kilohms
COMPONENT IN:
YP P (Component Video)
B R
Y:1.0 Vp-p, 75 ohms unbalanced, sync negative
P :0.7 Vp-p, 75 ohms
B
P :0.7 Vp-p, 75 ohms
R
Signal format: 480i, 480p, 720p, 1080i, 1080p
Audio
500 mVrms (100% modulation)
Impedance: 47 kilohms
Trademark Information
Macintosh is a trademark of Apple Inc., registered in the U.S. and other
countries.
HDMI, the HDMI logo and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing LLC.
Manufactured under license from Dolby Laboratories. "Dolby" and the
double-D symbol are trademarks of Dolby Laboratories.
Blu-ray Disc is a trademark.
"BRAVIA", and
KDL-19M4000
All manuals and user guides at all-guides.com

SPECIFICATIONS

are trademarks of Sony Corporation.
HDMI IN:
HDMI
Video: 480i, 480p, 720p, 1080i
Audio: Two channel linear PCM 32, 44.1
and 48 kHz, 16 bits
Audio
500 mVrms (100% modulation)
Impedance: 47 kilohms
AUDIO OUT:
500 mVrms (100% modulation)
PC IN:
D-sub 15-pin, analog RGB, 0.7 Vp-p, 75 ohms, positive
PC AUDIO IN:
Stereo mini jack, 500mVrms, 47 kilohms
HEADPHONES:
Stereo mini jack
Impedance: 16 ohms
Design and specifi cations are subject to change without notice.
KDL-19M4000
4