Table of Contents
Advertisement
GENERAL RECOMMENDATIONS
The warranty on this cutter does not cover items that have been subjected to operator
abuse or negligence. To receive full value from the warranty, operator must maintain
unit as instructed in this manual.
Some adjustments will need to be made periodically to maintain your unit properly.
BEFORE EACH S EAS ON
A new spark plug and clean air filter assure proper air fuel mixture and help your engine
run better and last longer.
•
Replace the spark plug.
•
Clean or replace the air filter.
•
Check blades and belts for wear.
BEFORE EACH US E
•
Check engine oil level. (Do this twice to ensure an accurate reading.)
•
Check condition of air filter and clean or replace if necessary.
•
Check blade operation.
•
Check for loose fasteners.
•
Lubricate threads of adjustment rod P/N 4006
DAILY MAINTENANCE
M ake sure all nuts and bolts are tight and cotter pins and retainer springs are secure.
Keep blades sharp. Observe all safety precautions.
figure –4 page 12
8
Advertisement
Table of Contents
