Advertisement
Quick Links
ASSEMBLY INSTRUCTIONS
EVERY EV256
STEP 1
1
8
3
7
6
5
Unpack the box and
sort all parts.
STEP 4
Turn the seat (4) upside down.
You can use the box as a handy
assembling stool.
Take the mounting kit with the
Allen key and the 2 screws (5).
STEP 2
2
4
Place the base (1) upside down and
press the five castors (2) into the five
holes. Watch out for damage to the
floor or table! For example, put a towel
underneath.
STEP 5
Slide the armrest (6) into the opening.
Make sure that the lever is open
(push in as marked).
STEP 3
Place the base on the wheels and
insert the gas spring (3).
STEP 6
Also pay attention to the difference
between left and right, the armrest
must point forward. The front of the
seat is black.
Page 1 of 2
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Interstuhl Büromöbel EVERY EV256
Summary of Contents for Interstuhl Büromöbel EVERY EV256
- Page 1 ASSEMBLY INSTRUCTIONS EVERY EV256 STEP 1 STEP 2 STEP 3 Unpack the box and Place the base (1) upside down and Place the base on the wheels and sort all parts. press the five castors (2) into the five insert the gas spring (3).
- Page 2 STEP 7 STEP 8 STEP 9 For the armrests you need the First, loosely tighten the screw with Before assembling the backrest (8), Allen key and 1 screw per side. the Allen key. Then fully tighten. You take the mounting kit with The screw must go in the inner hole.
Need help?
Do you have a question about the EVERY EV256 and is the answer not in the manual?
Questions and answers