B&K Reference 20 Plus A/V System Controller Owner's Manual page 65

From Remote
­ V
1
(PAUSE) or (STOP)
2 SEL or ENTER
Set the maximum level of Zone 1 (A) - Max level allows you to set a maximum volume level for Zone 1 (A). This
is very useful if you are using speakers that can't handle the maximum power output from your processor or if you
simply wish to limit the volume that can be achieved using normal front panel or remote operation.
WARNING - If you set this level too low, the processor may appear broken (no sound).
From Remote
­ V
1
(PAUSE) or (STOP)
X W
2
(REW) or (FF)
Set Zone 1 (A) product ID - Each message transmitted from your remote includes a Product Code, identifying
the manufacturer, and Zone product ID code from 1 to 16. The product ID code allows multiple B&K products to
be controlled from the same remote. Your processor actually uses two product ID codes - one for Zone 1 (A)
(normally set to ID code 1) and the other for Zone 2 (B) (normally set to ID code 2). If you have a system with
multiple B&K products then you may wish to set the Zone product ID codes to other values. Note that you cannot
set the Zone 1 (A) product ID to the same setting as Zone 2 (B) or vice versa. If you need to set Zone 1 (A) to the
current Zone 2 (B) setting then set Zone 2 (B) to some other value first.
WARNING - if you change the Zone product ID code in the processor without making the corresponding
change to the remote then the remote will no longer work. Refer to the separate remote manual for details
on changing the remote's product ID ("device code").
From Front Panel
(UP) or (DOWN)
(ENTER)
ADVANCED ZONE A SETTINGS
1 Max Level 1 Max Level
2 Zone ID
3 On Sreen Display
4 V1 Output
5 Surround Modes
next item adjust
MENU advanced setup
=$ =21( ,'
From Front Panel
(UP) or (DOWN)
VOLUME KNOB
ADVANCED ZONE A SETTINGS
1 Max Level
2 Zone ID 2 Zone ID
3 On Sreen Display
4 V1 Output
5 Surround Modes
next item adjust
MENU advanced setup
=$ =21( ,'
62
Action
move to Zone 1 Setup (A)
activate ADVANCED ZONE A
SETTINGS
+15 dB +15 dB
1
Enabled
Tape
Auto

Action
move to Max Level
adjust level to desired value
+15 dB
1 1
Enabled
Tape
Auto

13258 11/01