Download Print this page

Advertisement

Quick Links

IMPORTANT! READ CAREFULLY AND
KEEP FOR FUTURE REFERENCE.
PORTABLE SWING
BBPSWINGSTA

Advertisement

loading

Summary of Contents for Bubbli BBPSWINGSTA

  • Page 1 IMPORTANT! READ CAREFULLY AND KEEP FOR FUTURE REFERENCE. PORTABLE SWING BBPSWINGSTA...
  • Page 3: Safety And Warnings

    SAFETY & WARNINGS READ ALL INSTRUCTIONS BEFORE ASSEMBLY AND USE OF THIS CARRIER. RETAIN THIS USER GUIDE FOR FUTURE REFERENCE. WARNING Failure to follow these warnings and assembly instructions could result in serious injury or death. To prevent children from falling or being strangled in straps: •...
  • Page 4 IMPORTANT • This product needs to be assembled by an adult and always used under adult supervision. • Swinging speed should be checked and tested before using with a child to gain an understanding of each setting’s intensity. • Care should be taken in unpacking and assembly. •...
  • Page 5 For Safe Battery Use: • Keep the batteries out of children’s reach. • Do not mix old and new batteries. • Do not mix alkaline, standard, or rechargeable batteries. • Only batteries of the same or equivalent type as recommended are to be used. •...
  • Page 6 • Always remove batteries if the product is not going to be used for a month or more. Batteries left in the unit may leak and cause damage. • Recommended type batteries-alkaline disposables, size AA (LR6-1.5V). Never mix battery types. Change batteries when product ceases to operate satisfactorily.
  • Page 7 COMPONENTS A. Left Seat Frame B. Right Seat Frame C. Seat Pad D. Toy Bar E. Left Motor Assembly F. Right Motor Assembly G. Footrest Tube (x2) H. Power Adapter I. Remote Control...
  • Page 8 OVERVIEW Remote Control: Power Speed buttons (1 – 5) Timer buttons (15, 30 & 60Minutes) Music (9 Melodies) Nature sounds button (5 songs) Volume decrease Volume increase Control Panel: Battery Compartment Power Speed (1 – 5) Timer Music (9 Melodies) Nature sounds button (5 songs) Speed...
  • Page 9 ASSEMBLY Step 1: Remove the left and right motor assemblies then open the two legs until a “click” is heard. Power Left Right input Step 2: Attach both footrest tubes to the left and right motor assemblies until a “click” is heard. Note: Pay attention to the orientation of motor assemblies, as shown below.
  • Page 10 Step 3: Attach the left & right seat frames together until a "click" is heard. "Click" Step 4: Attach the seat pad to the assembled seat frame ensuring it is securely in place.
  • Page 11 Step 5: • Attach the assembled seat frame to motor assemblies until a “click” is heard. • Install the toy bar and toys by inserting both ends of the toy bar into the support hole at either side of the seat frame. •...
  • Page 12: Operation

    OPERATION Battery Installation Remote control: • Slide out the remote control battery tray and insert a CR2025 button battery (not supplied) into the tray. Pay close attention to the orientation of the polarity symbols. • Replace the battery tray. Button battery (CR2025) Control panel: •...
  • Page 13 Power • Connect the power adaptor to the motor assembly power input. • Connect the power adaptor plug into a power socket. Power Adaptor Button Functions Button Description Power Turns the swing on and off Remote control Select from one of the five speed settings (1 - 5) Speed Control panel Cycles through the five speed settings...
  • Page 14 ADJUSTMENTS Press the two buttons on the sides of the toy bar simultaneously to adjust the position of the toy bar. There are two positions available. Folding: To fold the swing frame, press the buttons in the front and back sides of the swing frame.
  • Page 15 Swing Lock: Press the lock button to stop the sear from swinging. If you want to resume swinging, just release the lock button. Safety Belt: • Use the two shoulder straps to secure your child in position. • Carefully attach the side to the central buckle. •...
  • Page 16: Cleaning And Care

    CLEANING & CARE Maintenance • This product requires regular maintenance to keep it in good working order. • Regularly check all parts of the product to ensure that they are operating correctly and for signs of wear or damage. • All electrical components should be regularly examined for signs of wear or damage.
  • Page 17 NOTES...
  • Page 20 Need more information? We hope that this user guide has given you the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com.