Download Print this page

Bubbli BBCHAIRHISA Quick Start Manual

Speckles high chair

Advertisement

Quick Links

Please read all instructions carefully and keep a copy of these instructions for
future reference.
Check that all safety locks are engaged before placing child in the high
chair.
Always keep child in view while they are in the high chair.
Not recommended for children under 6 months old.
The tray is not designed to hold your child in the high chair.
Use safety locks and brakes at all times.
Always secure your child in the restraint. Ensure that you child wears a
correctly fitted and adjusted harness at all times.
The high chair should only be used in an upright position once the child is
capable of reliably and consistently sitting upright.
Only use the high chair on a secure, level surface.
Do not allow children to stand on the seat or footrest, or climb into or out
of the high chair.
When adjusting the high chair, make sure that parts of your child's body
are clear of any moving parts.
Do not carry the high chair with your child in it.
To reduce the risk of injury, position the high chair away from furniture,
walls, hot surfaces and liquids, window curtain cords and electrical cords.
Position the high chair away from furniture when the high chair is not
being used at a table with the tray removed.
Periodically check that all parts of the high chair are in good working
order.
Do not use the high chair if it is damaged for broken. Contact the Kogan
customer support team for repair advice.
Do not use the high chair unless all components are correctly fitted and
adjusted.
The weight of the child using this high chair should not exceed 17kgs.
Promptly replace worn out or broken parts.

Advertisement

loading

Summary of Contents for Bubbli BBCHAIRHISA

  • Page 1 Please read all instructions carefully and keep a copy of these instructions for future reference. • • • • Check that all safety locks are engaged before placing child in the high • chair. Always keep child in view while they are in the high chair. •...
  • Page 2 Seat x 1 Tray x 1 Foot Rest x 1 Leg Assembly x 2 Leg Base Moulds x 2 (Castors fitted) Plastic Clips x 2 Fixing Bar (axle) x 1 Plastic Caps x 2 Support Tube Fixing Support Tube x 1 (1 pre-assembled) (1 pre-assembled) Screws, Nuts and...
  • Page 3 Place the footrest along the front of the seat assembly. Press firmly to ensure it 'clicks' into position. Squeeze the levers on both front legs of the chair and raise or lower to the desired position. Attach tray by aligning it with the armrests, and squeezing the lever under the front of the tray, slide tray along armrests.