Connecting A Video Source; Composite Video; S-Video; Connecting To A Video Output Device - Avermedia TV TUNER BOX User Manual

Connecting a Video Source

Composite Video: Connect the video
cable (not supplied) to the video out of
the video device and to the AVerTV
Box3 VIDEO1 IN or VIDEO2 IN port.
Connect the audio cable to the left &
right audio out of the video
device and to the
AVerTV Box3 left &
right AUDIO1 IN or
AUDIO2 IN ports.
S-Video: Connect the s-video cable (not supplied) to the s-video out of the
video device and to the AVerTV Box3 S-Video IN port. If your video player
supports s-video, use this type of connection as s-video provides better

Connecting to a Video Output Device

You can output the video
signal from your TV
antenna or video
source (like the
camcorder) to a receiving
device. The receiving device can be a
VCR, video capture card, etc. Simply
connect the receiving device to the
AVerTV Box3 VIDEO OUT port and
left & right AUDIO OUT ports.
NOTE : The AVerTV Box3 provides composite video output only.
OUT
Video & Audio Cable
(not supplied)
picture quality than composite
OUT
S-Video Cable
(not supplied)
Audio Cable
(not supplied)
Audio Cable
(not supplied)
Video Cable
(not supplied)
E x a m p l e :
IN
L
Video & Audio Cable
R
User's Manual
Example:
VCR
Camcorder
Video Game
(e.g. Nintendo ) ®
video.
Example:
VCR
Camcorder
Video Game
(e.g. Nintendo ) ®
Videotape
VCR
PCI Video
Capture Card
Hard disk
CR or any
Computer
storage disk
7