Rm-X170 Remote Commander - Sony XAV-AX8100 Operating Instructions Manual

RM-X170 remote commander

The remote commander can be used to operate the
audio controls. For menu operations, use the touch
screen.
Note
The white buttons in the illustration above are not
supported.
 OFF
Turns the source off.
 MONITOR OFF
Turns off the monitor.
To turn back on, press again.
 EQ (equalizer)
Selects an equalizer curve.
 Number buttons (0 to 9)
 CLEAR
 ATT (attenuate)
Attenuates the sound. Press again to cancel the
attenuation.
  (play/pause)
 / (previous/next)
/ (fast-reverse/fast-forward)
Functions differently depending on the selected
source:
– [Radio]: select a preset station.
– [SXM] (SiriusXM): select a preset channel.
– [USB]/[Bluetooth]: move to the previous/next
file.
Press and hold to:
– [Radio]: tune into a station automatically
(SEEK+/SEEK–).
– [USB]/[Bluetooth]: fast-reverse/fast-forward.
 ///
Functions differently depending on the selected
source.
– [Radio]: select a preset station or tune into a
station automatically.
– [SXM] (SiriusXM): select a preset channel or
move to the previous/next channel.
– [USB]: select a folder or move to the previous/
next file.
ENTER
Enters the selected item.
 SRC (source)
Changes the source. Each time you press this
button, a selectable source is displayed in a
popup on the current display.
 MODE
Selects the radio band.
Remove the insulation film before use.
5
GB