Totem KINPlay Tower II Owner's Manual page 10

The KIN Play Tower does not decode surround effects so your TV, source, or
app must be set to PCM output in their respective audio menus. Consult their
manuals to ensure this important step is performed properly.
OPTICAL AUDIO OUTPUT from TV to KIN Play Tower
This is the best setup option for TVs equipped
with an OPTICAL AUDIO OUTPUT. All sources
such as a cable box, DVD/Blu-Ray, media
streamer, etc. are connected directly to the
TV. The OPTICAL AUDIO OUTPUT from the
TV is then connected to the OPTICAL INPUT
on the KIN Play Tower.
All TV and source manufacturers have their own designations and terms for their audio settings. The
following instructions may not use the identical terms of your components, but they should be similar
and help you get through the setup process.
totemacoustic.com
Enter the SETTINGS section of your TV (or source or app).
Find and select the AUDIO section.
Enter the AUDIO section and look for a setting often labeled
as AUDIO OUTPUT, or something similar.
Select the AUDIO OUTPUT option.
ENTER THE AUDIO OUTPUT SETTING.
Select the OPTICAL option.
The TV/Source should be ready to send sound to the KIN Play
Tower.
10