Advertisement
Wiring harness color code.
driver's window up relay
GREEN
RED
constant 12 volt battery source
passenger's window up relay
BLUE
BLACK
chassis ground
driver's window down relay
WHITE
passenger's window down relay
YELLOW
PINK or GRAY
CHANNEL 7 relay (optional)
PURPLE
CHANNEL 6 relay (optional)
BROWN
CHANNEL 5 relay (optional)
The remote system output wires are negative switched outputs designed to turn on external
relays. These outputs can only handle 0.25 amps and must be used with a relay. Two dual relay
packs are supplied in the kit. To use all 7 channels you will need to purchase three additional
relays.
WINDOW CONTROL OPERATION
Each key chain transmitter has four buttons. Each button will activate its own independent
channel when pressed. Also, an additional 3 channels can be activated by pressing button 1 and
one of the other three buttons at the same time.
Button 1 activates the driver's window up. The window will continue to move as long as the
button is held. Button 3 activates the driver's window down.
Button 2 activates the passenger's window up. Button 4 activates the passenger's window
down.
Pressing buttons 1 and 2 at the same time can activate an external relay on Channel 5.
Pressing buttons 1 and 3 at the same time can activate an external relay on Channel 6.
Pressing buttons 1 and 4 at the same time can activate an external relay on Channel 7.
The emergency release switch can be wired to roll the driver's window down to provide
emergency entry to the vehicle.
BLUE
CHANNEL 2
All channels must
GREEN
CHANNEL 1
be connected to
WHITE
relays if they are
CHANNEL 3
used.
YELLOW
CHANNEL 4
DAKOTA DIGITAL
ANTENNA,
DO NOT GROUND
in-line FUSE
BLACK: GROUND
PINK
CHANNEL 7
PURPLE
CHANNEL 6
BROWN
CHANNEL 5
2
RED: +12 BATTERY
MAN# 650016:A
Advertisement
