Blinds To Go Valance Installation Manual page 6

Mounting your valance
When necessary, the top of the valance can be trimmed down with a utility knife by scoring the back
Note:
of it and snap the excess off.
Inside mount
(blind/shade is mounted into the ceiling, or inside the window frame into the top of the
frame)
Using regular brackets:
surface TOGETHER with the mounting brackets
1. Determine position of the mounting brackets as instructed
in the installation guide for your blind/shade. Match the
position of brackets on the valance.
2. Drill holes into the valance and the mounting surface.
Then place the mounting brackets in position and screw
the valance into the mounting surface.
Using Box Brackets: Valance rests on headrail or track of blind
1. Cut the top of the valance to allow clearance for mounting brackets
2. Fit valance over headrail/track of blind/shade.
Outside mount
(blind/shade is mounted on the window frame or wall)
Place completely assembled valance into the bracket lips of the valance support brackets and push in.
The valance should rest on the brackets.
mounting bracket
5
(hardwares for a horizontal blind are illustrated)
Valance is screwed into the mounting
valance support
bracket
ceiling or
top of
window
frame
mounting bracket