Blinds To Go Valance Installation Manual page 3

Step 1. Slide in valance insertion
Slide the valance insertion through the main valance section. For a Double Majestic Valance, slide the
valance insertion for both the main section and the lower section.
Note: If the material is too thick to slide in, pop the insertion into the main valance section. Take
precaution not to break the material while bending the insertion.
Step 2. Only for Double Majestic Valance:
1. Slide all but two of the lower section support brackets into the main valance section and space
them evenly ( Fig. A ).
2. Attach the lower section to the main section by sliding the lower section through the lower
section support brackets ( Fig. B ).
lower section
support bracket
(Fig. A)
Royal Valance
main section
lower section
Majestic Valance
Attach the lower section
(Fig.B)
2