Zhiyun WEEBILL 2 User Manual page 14

Installation and Balance Adjustment
2. Vertical Balance of the Tilt Axis
Unlock the tilt axis, make the lens face up, loosen the level mount lock screw. Push
the whole level mount to move forward or backward. Push until the camera can
stay still with the lens facing up (i.e.the camera stays still and vertical to the ground).
Complete this step by tightening up the screw.
3. Roll Axis Balance
Unlock the roll axis and the quick release plate latch, push the
camera to move left or right until the camera can stay still and horizontal to the
ground (as shown below). Complete this step by tightening up the latch.
①
② ②
③
④
10