Audiovox GMRS100 Owner's Manual page 6

Installing the batteries:
Battery installation is made more convenient when the carry clip is either
rotated left or right to the horizontal position, or is removed. Simply rotate
the clip in either direction to the horizontal position. Be careful not to use
excessive force. To remove the clip, press down on the spring release tab
and pull the clip straight out from the radio body. Next, press down with the
thumb at the embossed arrow, slide the battery cover down and lift it away
from the compartment. Insert four AAA batteries (alternate positive ends (+)
toward the top of the transceiver, starting left-to-right.
CLIP SPRING
RELEASE TAB
CARRY
CLIP
BATTERY
COVER
2. Then lift cover at
1. Using thumb,
press down on bottom to open.
Remove cover.
battery cover at
arrow and slide
cover down.
COVER
ARROW
POSITIVE
+ +
TERMINALS
+ +
3. Insert four AAA batteries
(positive (+) end toward
the top begining at left
side and alternating
positive terminals as
shown).
6
128-XXXX
6 of 24