Advertisement
7.) Solder Jumper J3 (optional):
Perform this step only if you really don't want to use the additional voltage regulator
of the standard kit. If you want to use the USB socket of the Arduino MKR for
powering this step is unnecessary also.
Please note:
The supply voltage connected to K9 has to be 5V DC in this case.
Perform the next steps only if you have the standard kit
(includes the parts of the voltage regulator). Otherwise
continue with step 14.
Construction manual ArduiBox MKR Rev B
8 of 15
Solder this
Jumper
Advertisement
