InFocus Quantum Laser Core Series Installation And User Manual page 34

If you experience any of the following symptoms, stop viewing 3D content immediately and consult a medical specialist: (1)
l
altered vision; (2) lightheadedness; (3) dizziness; (4) involuntary movements such as eye or muscle twitching; (5)
confusion; (6) nausea; (7) loss of awareness; (8) convulsions; (9) cramps; or (10) disorientation. Children and teenagers
may be more likely than adults to experience these symptoms. Parents should monitor their children and ask whether they
are experiencing these symptoms.
Watching 3D projected content may also cause motion sickness, perceptual aftereffects, disorientation, eye strain, and
l
decreased postural stability. Users should take frequent breaks to lessen the potential of these effects. If you have any of
the above symptoms, immediately discontinue using this device and do not resume using it for at least thirty minutes after
the symptoms have subsided.
Watching 3D projected content while sitting too close to the screen for an extended period may damage your eyesight.
l
The ideal viewing distance should be at least three times the screen height. We recommend that the viewer's eyes are level
with the screen.
Watching 3D projected content while wearing 3D glasses for an extended period may cause headaches or fatigue. If you
l
experience a headache, tiredness or dizziness, stop viewing the 3D projection and rest.
Do not use 3D glasses for any other purpose than for watching 3D projected content.
l
Wearing the 3D glasses for any other purpose (such as spectacles, sunglasses, protective goggles, etc.) may be
l
physically harmful to you and weaken your eyesight.
Viewing 3D projected content may cause disorientation for some viewers. Accordingly, DO NOT place your 3D projector
l
near open stairwells, cables, balconies, or other objects that can be tripped over, run into, knocked down, broken or fallen
over.
7.8.2 ENABLING 3D MODE
To enable 3D mode, the input frame rate should be set to 60Hz. Other frame rate are not supported. For the best 3D
performance, use a resolution of 1920x1080. 4K (3840x2160) resolution is not supported in 3D mode.
1. Select Display > Display Mode > 3D > 3D Mode.
2. Select On.
If the 3D Mode is set to Off, the 2D-3D and 3D sync Invert functions will not be selectable. These functions can only be
selected if the 3D mode is set to On.
3. Press Enter.
4. if you only want to view the left or right frame:
Select Display > Display Mode > 3D > 3D-2D.
l
Select L (left) or R (right).
l
Press Enter.
l
34