Omron NP Series User Manual page 25

NP-series PT Functions and Operations
Displaying Screens
Reading Data from
the Host
Sending Data to the Host
The information displayed on the screens is created using the NP-Designer
on a computer and transferred to the PT. The required screens can be dis-
played by using commands from the host or touch switch operations.
A communications method such as NT Link is used to connect the host, and
the required data is automatically read from the host.
Data input using touch switches (button ON/OFF status, numerals, and char-
acter strings) is sent to the host.
Touch panel
Host
The required screens can
be displayed by using
commands from the host
or touch switch operations.
Host
Host
Section 1-1
3