CEStronics AccessOne TSG8 Assembly And Operating Manual page 16

Door controller
Table of Contents

Advertisement

5.1.8 OUT1–8
For the connection of actuators (door opener*, motorised lock, etc.), arming of the burglar alarm system, door alarm, silent alarm,
start video recording, etc.
*For door openers, continuous supply with free-wheeling diode where possible
OUT potential-free
No.
Connection
1
Normally open contact (NO)
2
Changeover/Com
3
Normally closed contact (NC)
OUT active
No.
Connection
1
12 V
2
GND
3
12 V
www.ces.eu
Function
Power supply
Ground. The signal voltages are measured against this cable.
Power supply

Advertisement

Table of Contents
loading

Table of Contents