Coitech IFH01-20-UK Quick Start Manual

Industrial Fan Heater
Art.no 18-2820, 36-5392
Model IFH01-20-UK, IFH01-20
Please read the entire instruction manual before using the product and save it
for future reference. We reserve the right for any errors in text or images and
any necessary changes made to technical data. If you have any questions
regarding technical problems please contact our Customer Services.
Safety
• The fan heater may be used by persons with reduced physical, sensory
or mental capability, lack of experience or knowledge which could
jeopardize their safety, provided they have been given supervision or
instruction concerning the safe use of the product and understand
the hazards involved.
• Never let children play with the fan heater.
• The fan heater is for indoor use only.
• Never cover the fan heater whilst it is switched on.
• Do not use the fan heater in bathrooms or environments where it can
be exposed to moisture or water.
• Do not plug any other appliances into the same wall socket as the fan
heater.
• Never use the fan heater with a timer or other device that could
automatically turn the heater on when it is unattended.
• Never use the fan heater in rooms where flammable liquids or gases are
stored.
• The mains lead should be checked regularly. Never use the fan heater if
the mains lead or plug is damaged.
• If the mains lead is damaged in any way it must be replaced by
a qualified electrician.
• Never use the fan heater if it is in any way damaged or malfunctioning.
Care and maintenance
• Always disconnect the plug from the wall socket before moving or
cleaning the fan heater or when it is not to be used for a long time.
• Clean the fan heater using a lightly moistened cloth. Only use mild
cleaning agents, never solvents or corrosive chemicals.
GREAT BRITAIN • CUSTOMER SERVICE tel 020 8247 9300 e-mail customerservice@clasohlson.co.uk internet www.clasohlson.co.uk postal 10 – 13 Market Place, Kingston Upon Thames, Surrey, KT1 1JZ
Placement
• Place the fan heater on a flat surface a safe distance away from
flammable objects such as curtains and furniture.
• Be sure to place the fan heater where there is no risk of people tripping
over it or its mains lead.
Operating instructions
Note:
• The fan heater will become very hot during and after use.
• A small amount of smoke might be emitted when the fan heater is
used for the first time, this is completely normal. The heating element is
coated with a thin layer of protective oil which is burnt off the first time
the heating element is heated.
• Choose a suitable power setting taking into consideration the
temperature and location where the fan heater is to be used.
• Using the highest power setting could constitute an additional load on
the building's electrical system. If more than one load device (washing
machine, microwave, kettle, etc) is plugged into the same electrical
circuit as the industrial fan heater, the extra current draw could cause
the fuse/circuit breaker to trip.
• Contact a qualified electrician if you are unsure or experience problems
with your circuit breaker.
Turning the fan heater on
1. Plug the mains lead into a wall socket.
2. Turn the power selector to the preferred setting (refer to
the specifications of the different power settings) and turn
the thermostat knob to the maximum setting.
3. When the room temperature has risen to the desired level, turn
the thermostat knob back until the heating element switches off.
The heating element will come back on again when the temperature drops
to maintain the set temperature. Note: The fan will continue to rotate even
after the heating element has switched off. The fan will only be switched
off when the power selector is set to 0.
Switching the fan heater off
Turn the power selector to the 0 position.
Overheating protection
The fan heater is fitted with an over-temperature safety cut-off which
switches the fan off if it overheats.
Resetting the overheating protection
4. Set the power selector to 0.
5. Unplug the mains lead and let the fan heater cool down for
5–10 minutes.
6. Plug the mains lead back in and turn the fan heater on.
Responsible disposal
This symbol indicates that this product should not be
disposed of with general household waste. This applies
throughout the entire EU. In order to prevent any harm to
the environment or health hazards caused by incorrect waste
disposal, the product must be handed in for recycling so that
the material can be disposed of in a responsible manner.
When recycling your product, take it to your local collection
facility or contact the place of purchase. They will ensure
that the product is disposed of in an environmentally sound
manner.
Specifications
36-5392, 18-2820
Rated voltage 230 V, 50 Hz
Power settings 650/1300/2000 W
IP24
Protection class
Mains lead 1.8 m
Weight 3.6 kg
Size 30 × 21 × 20 cm
Overheating protection Yes
This product is only suitable for well insula-
ted spaces or occasional use.