Cutera Excel V+ Operator's Manual page 30

22
To return to STANDBY mode, press the
When the system is in READY mode and the footswitch is depressed, treatment energy is discharged
from the handpiece, the system emits an audible tone and a yellow indicator illuminates on the Treatment
Screen to indicate laser emission.
If the system is not used for more than one minute, the system automatically goes into STANDBY mode.
WARNING
Except during actual treatment, the system must always be in
STANDBY mode. Maintaining the system in STANDBY mode
prevents accidental treatment beam exposure if the footswitch is
inadvertently depressed.
WARNING
Verify that all persons in the treatment room are wearing the
appropriate treatment beam safety eyewear before placing the
system in READY mode.
EXCEL V+ OPERATOR MANUAL
D2325, REV A, 2/19
Location of Laser Status Button
(CoolView Treatment Screen shown)
(laser status) button.
Laser status button
(READY mode)