Assembly Instructions; Operation - BMW 80932466237 Translation Of The Original Instructions

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 11

Assembly instructions

Assemble the handlebar
Take out the handlebar carefully without pulling;
Before assembling the handlebar, the scooter has to be completely unfolded
and the folding lever properly closed;
Plug the throttle connector keeping the handle bar with the hand brake on the
left and parallel to the ground;
Lightly push the connector and the throttle cable down the tube;
Align the handle bar with the front wheel and then tighten the 4 screws on
the tube sides with the tool provided;
Before each trip
The Micro for BMW E-scooter must be checked for its roadworthiness before
each trip. The vehicle is delivered by the manufacturer fully ready for use. Because
defects potentially impairing the function of the vehicle may occur during
transport as well as during any periods off the road, please always pay attention to
the following points before using for the first time and before each trip:
Test item
Lights
General condition
Are all screws tightened firmly and all components secured?
Brakes
Are the brakes set correctly and fully functional?
Has the folding mechanism clicked into place properly and
Folding mechanism
is the clamping lever closed and tightened firmly?
Battery charge status
Current riding mode
Micro-APP
Download from Android or IOS the APP "Micro Mobility"
Test content
Are the lights turned on?
Is the battery sufficiently charged?
Which driving mode is currently set?

Operation

Side stand
The Micro for BMW E-scooter has a side stand. This is located on the side under
the footboard, just below the folding mechanism.
During each trip, make sure that the side stand is always folded correctly.
Unfolding
Your Micro for BMW E-scooter is delivered folded up. After having assambled the
handle bar on it, in a few simple steps, it is unfolded and ready to ride. The
following explains how to unfold the scooter.
1.
Press down the rear brake in order to release the front tube hook.
Image:
Side stand folded out
Image:
Side stand folded in
30

Advertisement

Table of Contents
loading

Table of Contents