Table of Contents
Advertisement
5.8
PC Health Status
The PC Health Status screen shows the motherboard CPU and fan
temperatures, and allows you to set threshold levels for efficient system
operation.
CPU Temperature
MB Temperature
CPU Fan Speed
System Fan Speed
VCORE Voltage
3.3 V voltage
+5V in
+13V in
CPU FAN SPEED CONTROL
Start Up Temperature(ºC)
Full Speed Temperature(ºC)
Start Up PWM
Slope Select PWM/ºC
: Move
F5: Previous Values
The BIOS auto-detects the former eight items. The user cannot
configure these items.
CPU Temperature [xxxºC]
MB Temperature [xxxºC]
The onboard hardware monitor automatically detects and displays the CPU
and motherboard temperatures.
CPU Fan Speed [xxxxRPM]
System Fan Speed [xxxxRPM]
The onboard hardware monitor automatically detects and displays the
CPU and system fan speed in rotations per minute (RPM). If the fan is not
connected to the motherboard, the field shows 0 RPM.
VCORE Voltage, 3V Voltage, +5V in, +13V in
The onboard hardware monitor automatically detects the voltage output
through the onboard voltage regulators.
CPU Fan Speed Control [Enabled]
Allows you to enable or disable the CPU fan speed controller.
Configuration options: [Enabled] [Disabled]
5-22
Phoenix - Award BIOS CMOS Setup Utility
38
37
3835 RPM
0 RPM
1.50 V
3.34 V
5.19 V
11.61 V
[Enabled]
[50]
[70]
[60]
[4 PWM/ºC]
Enter:Select
+/-/PU/PD:Value
F6: Fail-Safe Defaults
PC Health Status
C
o
C
o
F10:Save&Exit
Select Menu
Item Specific Help
Press <Enter> to enable
or disable.
ESC:Exit
F1:General Help
F9: Optimized Defaults
Chapter 5: BIOS setup
Advertisement
Table of Contents
