Related Manuals for Satlink ST-7632 Series
Summary of Contents for Satlink ST-7632 Series
- Page 1 ST-7632 Series Single Channel High-Definition Modulator Start Guide v1.2 April, 2021 support@starlink7.com...
- Page 3 Output frequency ranges from 50 MHz to 860 MHz in 6 MHz, 7 MHz or 8 MHz channel bandwidth depending on the modulation technique. The operation of ST-7632 is intuitive by using on-panel keypad and 2.4” color LCD screen. ST-7632 Series HD Modulator...
-
Page 4: Operation Panel
• AC/DC power adapter ■ TV Standards • Start Guide • Cable TV (USA) J.83B • Over-the-Air TV (USA) ATSC (8VSB), ATSC3 • Cable TV (EU, SA) DVB-C (J.83A/C) • Over-the-Air TV (CO) DVB-T • Over-the-Air (SA) ISDB-T(b) ST-7632 Series HD Modulator... -
Page 5: Lcd Configuration Menu
♦ Key Tone press◄► to toggle keypad beep sound between ON and OFF. ♦ Factory Reset press OK to reset and restore factory defaults. ♦ About Display information of software and hardware revisions of the unit. ST-7632 Series HD Modulator... - Page 6 MPEG MPEG-2 Layer 1 audio coding applies to DVB-T broadcasting in Europe and South America. ACC Advanced Audio Coding for MPEG-4 applies to ISDB-T broadcasting in South America and certain ATSC (8VSB) broadcasting in North America. ST-7632 Series HD Modulator...
-
Page 7: Before Installation
HDMI video on your TV. • Your TV needs to learn the HDMI video channel by auto or manual channel rescan. Refer to the user’s guide of your TV set to practice the rescan for channel detection of HDMI video. ST-7632 Series HD Modulator... - Page 8 ⑧ Change the TV channel to the channel plan number selected in step 6. ⑨ HDMI video is displayed on the TV if HDMI video source is inserted. Otherwise, the SATLINK logo is displayed. Once the HDMI video source is detected and modulated, the HD LED on panel glows solid amber.
- Page 9 ⑧ Change the TV channel to the channel plan number selected in step 6. ⑨ HDMI video is displayed on the TV if HDMI video source is inserted. Otherwise, the SATLINK logo is displayed. Once the HDMI video source is detected and modulated, the HD LED on panel glows solid amber.
- Page 10 ⑧ Change the TV channel to the channel plan number selected in step 6. ⑨ HDMI video is displayed on the TV if HDMI video source is inserted. Otherwise, the SATLINK logo is displayed. Once the HDMI video source is detected and modulated, the HD LED on panel glows solid amber.
- Page 11 ♦ Service Provider Name of the broadcaster responsible for the service availability or authority contained in Service Description Table (SDT). ♦ Network Name Name of the network contained in Network Information Table (NIT). ST-7632 Series HD Modulator...
- Page 12 Installing Multiple Modulators In case multiple units of ST-7632 series modulators are installed on the same coax network/wiring or connected to the same TV set, pay attention to following items to avoid conflicts or interference among modulators. • Set up and connect the modulator to coax network or TV set one modulator at a time.
-
Page 13: Specifications
0 to 50 °C (Opera�on) Temperature -20 to 80 °C (Storage) SATLINK logo screen on TV Note: In order to display video normally on TV • Signal accepted by the TV must comply with standard MPEG-4 encoding • The video content is not protected under High-Bandwidth Digital Content Protection (HDCP) - Page 14 CH-64 CH-43 CH-44 CH-36 CH-65 CH-45 CH-37 CH-66 CH-46 CH-38 CH-67 CH-47 CH-39 CH-68 CH-48 CH-40 CH-69 CH-49 CH-41 Note: * indicates channels with 7 MHz bandwidth. 7 MHz channels are not available in the UK. ST-7632 Series HD Modulator...
- Page 15 CH-29 563.143 CH-62 761.143 CH-30 569.143 CH-63 767.143 CH-31 575.143 CH-64 773.143 CH-32 581.143 CH-65 779.143 CH-33 587.143 CH-66 785.143 CH-34 593.143 CH-67 791.143 CH-35 599.143 CH-68 797.143 CH-36 605.143 CH-69 803.143 CH-37 611.143 CH-38 617.143 ST-7632 Series HD Modulator...
- Page 16 Frequency 778.000 MHz (# 88) Channel Name SLK HD1 • Channel Plan is for reference only. It may vary across countries, areas or cities. Channel Frequency Channel Frequency Channel Frequency (MHz) (MHz) (MHz) 52.5 60.5 68.5 ST-7632 Series HD Modulator...
-
Page 17: Warranty
“Grounding of Outer Conductive Shield of a Coaxial Cable,” or in accordance with local regulation. ■ Declaration of CE Conformity for EU Manufacturer: SatLink Electronics Co., Ltd. No. 26, Zishan Road, Jiangnan High-Tech Park, Licheng District Quanzhou, Fujian Province, China... -
Page 18: Troubleshooting
My HDMI video cannot be viewed on TV but other channels can be viewed • If SATLINK logo screen can be viewed on TV without HDMI source device connected, check the user’s guide of your HDMI device to ensure fixed and high resolution to output video signal for modulation correctly. - Page 20 Fujian Satlink Electronics Co., Ltd. Copyright 2020, All Rights Reserved. Jiangnan High Technology Industrial Zone Licheng District, Quanzhou, Fujian, China www.satlinkcn.com sales@satlinkcn.com North, Central and South America Distribution StarLink LLC www.starlink7.com support@starlink7.com...
Need help?
Do you have a question about the ST-7632 Series and is the answer not in the manual?
Questions and answers