Philips DVD590M Quick Use Manual page 2

All manuals and user guides at all-guides.com
continue...
1 2 3
EJECT
4 5 6
7 8 9 0
PREVIOUS NEXT
DISC MENU SYSTEM MENU
OK
RETURN/TITLE DISPLAY
SUBTITLE ANGLE ZOOM AUDIO
REPEAT REPEAT SEARCH MUTE
A-B
Pull
3V
Pull
3V
3V
Push
Region Codes
DVDs must be labeled for ALL regions or for
Region 1 in order to play on this DVD system.
1
ALL
Detailed playback features and additional functions are described in the
01-DVD590-17 QUG-Eng1 2
Make sure your DVD Player and
TV are connected and turned on!
Playing a disc
1
Turn on the TV, then press 2
You should see the blue Philips DVD background screen on the TV (if no disc in the DVD
Player).
2
Gently insert a disc into the disc slot. From that point, the Player
will take the disc and load it automatically.
Make sure the disc label is facing left. For double-sided discs, load the side you want to
play facing left. For 8cm discs, load it in the middle of the disc slot.
3
Playback will start automatically.
If a disc menu appears, use 3 4 1 2 buttons on the remote to make the necessary
selection, then press OK to confirm. Or, use the numeric keypad on the remote to select
Press
features. Follow the instructions given in the disc menu.
4
To stop playback, press STOP 9.
Check the AV (Audio/Video) mode on your TV.
* Usually this channel is between the lowest and highest channels and
may be called FRONT, A/V IN, or VIDEO.
* Or, you may go to channel 1 on your TV, then press the Channel down
button repeatedly until you see the Video In channel.
* Or, your TV remote control may have a button or switch that chooses
different video modes.
* Do not use channel 3 or 4 on the TV unless you are using an RF
modulator.
* See your TV manual for more details.
accompanying owner's manual.
2 2 to turn on the DVD Player. 2 2
No picture? No picture? No picture? No picture? No picture?
16/09/2003, 10:17 AM
8239 210 98131