NL Dishwasher detergent
Set rinse aid amount
If streaks or water spots remain on
the dishes, adjust the amount of rinse
aid.
on
to press.
1.
Approx. 3 seconds on
2.
to access the basic settings.
a The display shows Hxx.
a The display shows
to give.
Just as often on
3.
until the display shows the
factory-set value r05.
Press as many times until
4.
the desired amount of rinse aid
has been set.
– A low setting adds less rinse aid
during the wash cycle, reducing
the streaks on the dishes.
– A higher setting adds more rinse
aid during the wash cycle,
reducing water spots and
improving drying results.
To save the settings, press for
5.
approx. 3 seconds.
Switch off the rinse system
If the rinse aid refill indicator bothers
you, e.g. if you use a combined
dishwasher detergent with rinse aid
26
rinse aid component, you can switch
off the rinse aid system.
Tip: The function of the rinse aid is
limited in combined detergents. You
usually get better results by using
rinse aid.
Busy-
1.
2.
reflected
a The display shows Hxx.
to press
a The display shows
3.
4.
5.
a The rinse aid system is
V
Suitable dishwasher detergents
Only use detergents that are suitable
for the dishwasher. Suitable for both
non-combined and combined
dishwashing detergents.
For optimum washing and drying
results, use a non-combined
detergent in combination with
separate "softening salt"
→ Page 23 and "rinse agent"
→ Page 25.
Modern, powerful dishwasher
detergents usually have a low alkaline
recipe with enzymes. Enzymes
on
to press.
Approx. 3 seconds on
to access the basic settings.
to give.
Press just as often
until the display shows the
factory-set value r05.
Press as many times until
the display shows r00.
To save the settings, press for
approx. 3 seconds.
switched on and the rinse aid
refill indicator is deactivated.
detergent
Busy-