Install The Faucet - Kohler Margaux K-16230-4 Installation Manual

Supply Hoses
Stud
Lavatory
Bracket
Washer
Nut

1. Install the Faucet

Apply a bead of plumbers putty or other sealant to the underside
of the base of the spout body according to the putty
manufacturer's instructions.
Insert the supply hoses and stud of the faucet through the center
hole of the lavatory.
Position the base of the faucet flush against the center hole of the
lavatory.
From underneath the lavatory, slide the bracket and washer onto
the stud.
Thread the nut onto the stud.
Tighten the nut securely against the bracket to secure the faucet
into place.
Remove any excess putty or sealant.
Kohler Co. 3 1054193-2-B