Adjusting The Volume; Surround Effect - Altec Lansing inMotion IM414V2 User Manual

Inmotion digital speaker system for zune

Hide thumbs

Table of Contents

Enlarged version

FM Radio

The inMotion system features a built-in FM radio.

Activate the FM radio mode:

Press the "SOURCE" button until "FM" is selected on the LCD screen.

Scanning FM radio stations:

Press and hold the

incremental manner.

Programming FM radio stations:

To program FM radio stations into the wireless remote, follow the steps below:

Press the "SOURCE" button until "FM" is selected on the

LCD screen.

Use the

and

be preset.

To program the station in the inMotion system memory,

press and hold one of the preset buttons (P1, P2, P3) on

the wireless remote for approximately 3 seconds. The LCD

screen will display the preset number when a station has been

successfully programmed.

Once an FM radio station has been programmed, simply press the

appropriate preset button (P1, P2, P3) on the wireless remote to select it.

NOTE:

To re-program a station in the inMotion system memory, simply

repeat steps 1-3.

Connecting to an Alternate Audio Source

The inMotion system includes an auxiliary input jack (AUX) that allows you

to connect to alternate audio sources, such as other MP3 player models,

CD players, portable DVD players, and PCs and laptops. To connect the

inMotion system to an alternate audio source, follow the steps below.

buttons to scan radio stations in an

buttons to tune in the station to

Locate a 3.5 mm stereo cable (not included).

Connect one end of the 3.5 mm stereo cable into the auxiliary

input jack (AUX) located on the back of the inMotion system,

and the other end to the headphone or line out jack on your

alternate audio device.

Press the "SOURCE" button until "AUX" is selected on the

LCD screen.

Set the volume on the audio source at mid-level.

Set the volume on the inMotion system at the minimum level

and adjust to a comfortable listening level.