Xiaomi imilab KW66 User Manual page 6

Charging
1. Place the watch on the magnetic charger, please make sure
the charging contacts on the back of the watch are fully
adsorbed the metal contacts of the charger. It can be fully
charged within about 3.5 hours.
2. Plug the charging cable into a standard USB charger
purchased via official channels. The output voltage is 5V and the
output current is 1A.
If the watch cannot be turned on after being out of use for a
long time, please wipe the charging contacts of the charging
Sleep: The watch will monitor
your sleep status from 6:00 pm
to the 11:59 am of the next day.
Note: The sleep data on watch
will be cleared at 6:00pm
everyday. But you still can check
the historical sleep data in the
GloryFit APP.
Music: The watch can be used to
control the music player of the
mobile phone, you can use it to
play/pause or skip songs (it is
only compatible with the in-built
music player of the mobile
phone, may not be compatible
with third party's player, and the
volume cannot be adjusted on
the watch)
Stopwatch: The watch can be
used to count time (slide your
finger to the right after pressing
the pause button to exit and
return to the previous menu)
Message: The watch will receive
and display texts/ messages/
social media notifications from
your phone.
Setting: You can shut down or
reset the watch from setting, and
you can also check the info
about the watch and App
download QR code.
EN-04