Table of Contents
Advertisement
RF/OPT. Converter WIDEBAND + TX 1310nm FC/UPC 8
EN Important Safety Instructions
Important safety instruccions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Clean the AC/DC adaptor only with a dry cloth.
6. Do not block any ventilation openings. Install in accordance with the manufacturer' s
instructions.
7. Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
8. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized
plug has two blades with one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or the third prong are provided for
your safety. When the provided plug does not fit into your outlet, consult an electrician
for replacement of the obsolete outlet.
9. Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit the apparatus.
10. Only use attachments/accessories specified by the manufacturer.
11. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer,
or sold with the apparatus. When a cart is used, use caution when moving the cart/
apparatus combination to avoid injury from tip-over.
12. Unplug this apparatus during lightning storms or when unused for long periods of time.
13. Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the AC/DC adaptor, the the
AC/DC adaptor has been exposed to rain or moisture, does not operate normally, or has
dBmdBm
been dropped.
Warning
Reduce the risk of fire or electric shock, do not expose this AC/DC adaptor to rain or
moisture.
Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids,
such as vases, shall be placed on the AC/DC adaptor .
Safe operation
Power requirements for the AC/DC adaptor are 100-240V~ 50/60 Hz.
Should any liquid or object fall into the AC/DC adaptor, please refer to qualified personnel
for service.
To disconnect the equipment from the mains pull the plug never the cable.
It is strongly recommended not to connect the equipment to the mains until all
connections have been done.
Do not connect the equipment to the mains until it has been screwed to the wall.
The socket outlet shall be installed near the equipment and shall be easily accessible.
Do not take the cover off the equipment without disconnecting it from the mains.
Safe installation
For the AC/DC adaptor, ambient temperature should not be higher than 113°F.
Do not place the equipment near heat sources or in a highly humid environment.
Do not place the equipment in a place where it can suffer vibrations or shocks.
Please allow air circulation around the equipment.
Do not place naked flames, such as lighted candles on or near the product.
4
Advertisement
Table of Contents
