Advertisement
Quick Links
FT-103A
34.75"L x 18.5"W x 8"H
96 lbs
FT-103B
10"L x 7"W x 6"H
16 lbs
FT-103 Recife Fountain
(4 pieces)
COMPONENTS AND PARTS LIST
FT-103C
3.5"L x 1"W x 4"H
1 lb
NOTE: Component drawings are not to scale
Pump Kit Parts List
PK300 pump (1)
#10 compression stopper (1)
Approx. 12" length of 5/8" Black Non-Kink tubing (1)
5 ¾" length of 1/2" copper pipe +1/2" copper adapter (1)
Wedges (2)
4mm Allen wrench (1)
Hose clamps (3) Note – Hose clamps may be used as
flow restrictor
Level
4mm Allen wrench (included)
Fountain holds approximately
FT-103D
43"L x 26"W x 8"H
264 lbs
Revised August 22, 2013
Tools you will need
This fountain uses cover
FTNCOV-MED
20 gallons of water
Advertisement
Related Manuals for Campania International FT-103
Summary of Contents for Campania International FT-103
- Page 1 FT-103 Recife Fountain (4 pieces) Revised August 22, 2013 COMPONENTS AND PARTS LIST Pump Kit Parts List PK300 pump (1) FT-103A #10 compression stopper (1) 34.75”L x 18.5”W x 8”H Approx. 12“ length of 5/8“ Black Non-Kink tubing (1) 96 lbs 5 ¾”...
- Page 2 FT-103 Recife Fountain (4 pieces) Revised August 22, 2013 ASSEMBLY INSTRUCTIONS 1. Make sure you are assembling your fountain on a level surface capable of holding a minimum of 547 pounds in approximately an 8 square foot area. 2. Place the Basin (FT-103D) into position where the fountain will be installed.