Canon BJC-4400 Series User Manual page 51

N
Printing on banner paper requires quite a bit of ink. If you think
your BJ cartridge may run out of ink, use a new BJ cartridge.
For best print results on banner paper, use light design patterns.
To prevent ink from running over the edges of the sheet, print
within the margins shown in the previous illustration.
Set the paper
thickness lever for
banner paper
Cut the banner
at a crease
according to the
length you need.
Chapter 3
Open the front cover. Use both hands to open the front
cover.
Set the paper thickness lever to the right.
Close the front cover.
The maximum length you can use is six sheets (66 inches
or 1676 mm).
Always leave an extra sheet at the end of the banner—just
in case the type runs over.
Paper Handling 3-25