Technical Data - ABB MS 325 Operating Instructions Manual

Power manual motor starter MS 325
According to IEC/EN 60 ... 947-1/-4-1/-5-1 for low-voltage switchgear,
E
Directive 94/9/EG for explosion-protected areas,
EN 60079-14 for electrical equipment for gas explosion endangered areas
EN 50281-1 for electrical equipment for dust explosion endangered area

Technical Data

Rated operating voltage U [V]
e
Rated insulation voltage U [V~]
i
Rated current I [A]
e
Tripping class
Rated frequency [Hz]
Electromagnetic tripping
Response values
Disconnected characteristics according to
Service life mechanical/electrically
Permissible ambient temperature
- Storage [°C]
- Operation [°C]
Temperature compensation [°C]
Phase-failure protection
Protection system
Connection cross sections
Torque of the cage clamps
Wire [mm²]
Rope, 7-stranded [mm²]
Wire strand [mm²]
Mounting position
Mounting
Approvals and authorizations
8
2CDC 131 005 M5703
690
690
0.1 ... 25 / 14 ranges
10A
50/60, other frequencies (16 2/3 ... 400) on request
0.1 ... 0.63 A: 7.5 - 12
0.63 ... 2.50 A: 9
2.5 ... 6.30 A: 10
6.3 ... 25 A: 12.5 - 17.5 times
IEC/EN 60947-1
100.000 connections
-50 to +80
-20 to +50
-20 to +50
asymmetrical load activates premature release
IP20
Clamp screw size: Pozidrive size 2
max. 1.4 Nm
1 x 10 / 2 x 4
1 x 10 / 2 x 4
1 x 6
any
can be snapped on
see page 10
times (x Ie)
- 14 times
- 15 times
35 mm
ABB STOTZ-KONTAKT