Grant Aerona 3 T205 - C User Instructions page 8

Dia.11
3. Press 'TIME' button then the icon 'MON' will be flashing (Dia.12).
Dia.12
4. Use '+' or '-' button to select 'TUE', then press 'TIME' button twice
to copy the data. The display will show: (Dia.13).
Dia.13
Modif ying or adding new programmes
1. Press 'PROG' button and hold for approx 2 seconds, the display
will show: (Dia.14).
Dia.14
2. Use '+' or '-' button to select the day grouping which requires
modifying or a new day grouping for a new programme.
3. For modification press 'PROG' repeatedly to arrive at the pro-
gramme time requiring modification then use '+' or '-' button to
make the change. Press 'PROG' repeatedly again to arrive at the
next time requiring modification and use '+' or '-' button to make the
change.
Operating mode
Operating mode needs to be set to allow
programmed times to function
NOTE
Page 8
1. Use'+' button to set the output mode.
ON - Output to permanently ON and omit the program (Dia.15).
Dia.15
OFF - Output to permanently OFF and omit the program (Dia.16).
Dia.16
ON AUTO - Output to ON until next program OFF period (Dia.17).
Dia.17
OFF AUTO - Output to OFF until next program ON period (Dia.18).
Dia.18
One and two hour boost
1. Pressing '-' (Boost) once in normal operating mode turns on for 1
hour period (Dia.19).
Dia.19
User Instructions