Yaesu MEMORIZER FT-227R Instruction Manual page 5

(a) Do NOT strip insulation from wires.
(b) The tap connector will handle most wire sizes used in automotive
instrument panels.
(c) Slice the "hot" lead into tap connector as shown.
(d) Insert transceiver power lead 3 /4 of the way into connector
(just past metal connector element) .
U sing pliers, press the metal connector element until it is
(e)
FLUSH.
(f) Fold the hinged cover over the connector element and snap
firmly in place.
Plastic Insulator
with hinged
"snap-in" cover
slot for side
entry of "hot"
wire
+
The compact design of the FT-227R transceiver makes it ideal for
mobile installation, operating directly from the vehicle ' s 12 Volt
battery. For base station, use AC Power Supply rated 2. 5 ampere
at l3. 8V DC.
HOW TO USE THE TAP CONNECTOR
power to
transceiver
Figure 2.
RED
BLACK
Figur e 3 .
- 3 -
Connection made
with any pliers
type tool by driving
element over wires
�
wires
11
Self-stripping " U
type spring pres sure
connector element