Yaesu MEMORIZER FT-227R Instruction Manual page 11

5 .
DIAL Display
6. METER
7. MIC receptacle
8 . MEMORY switch
9. 5UP switch
10.
TONE SQUELCH switch
11.
MEMORY RECALL switch
12.
BUSY indicator
13.
ON AIR indicator
The digital display indicates the
operating frequency.
The meter indicates the signal
strength on receive and the
relative power output on transmit.
Four pin connector is used for
microphone input and push-to -
talk relay actuation.
When pressed, the frequency on
the d ial is memorized and M
lamp lights up.
memorized frequency, press the
switch a second time.
The channel frequency shifts
5 kHz up and 5UP lamp lights up.
An optional TONE SQUELCH
circuit is activated when pressed
and TONE SQ lamp lights up.
When pressed , the memorized
frequency is recalled and MR
lamp lights up.
The lamp lights up when a signal
is received.
The lamp lights up when in the
transmit mode.
- 9 -
To release the