Table of Contents
Advertisement
CAUTION:
TURN THE GAS AND ELECTRIC (IF EQUIPPED) SUPPLIES OFF AND ALLOW
THE BROODER TO COOL DOWN BEFORE ATTEMPTING ANY MAINTENANCE.
Inspect the flame characteristics by running the brooder with the Mechanical Ventilation OFF and Natural
Ventilation by opening the doors at the end of the house. This will result in a flame that is more stable to
observe.
If at anytime 25% or more of the flame turns yellow or on an annual basis, we recommend that the burner
and orifices be disassembled and cleaned. Built up deposits in the burner will not be effectively cleaned
with compressed air.
1. Slide the combustion air cup (natural gas only) away from the burner.
2. Rotate the swivel clamp clockwise and release the orifice fitting from the burner.
3. Unscrew the main burner orifice from the orifice fitting and clean the orifice hole with a drill bit the same
size as the orifice or by soaking the orifice in acetone liquid cleaner. Dry the orifice by blowing
–24–
Form No. 43539500
July 2021 A
Advertisement
Table of Contents
