Page 1
SMART LED DRIVER Class 2 Power Supply INPUT : 100-240VAC 0.40A 50/60Hz OUTPUT : 24-38VDC Max 950mA N Max current can be set by app SEC wire prep 0.5 -1.5mm² 8 - 9mm PRI wire prep. W - 0.75mm² C ...
Introduction SMART LED DRIVER Class 2 Power Supply INPUT : 100-240VAC 0.40A 50/60Hz OUTPUT : 24-38VDC Max 950mA N Max current can be set by app SEC wire prep 0.5 -1.5mm² 8 - 9mm PRI wire prep. W - 0.75mm²...
2.1 To get started, you will need: A ZigBee Gateway . A mobile app. 2.2 Installation The LED Lighting Driver must be installed by qualified electrical personnel, keep the wiring diagram below for future reference. SMART LED DRIVER Class 2 Power Supply INPUT : 100-240VAC 0.40A 50/60Hz...
Page 4
2.3 Connect to the gateway’s network 1. Set your gateway to permit joining. 2. The LED panel light connected to the LED Lighting Driver will flash 4 times and then become steady after installation, indicating it is ready to join the gateway's network (reset it if not).
Safety Notice WARNING: Failure to follow these safety notices could result in fire, electric shock, other injuries, or damage to the LED Lighting Driver and other property. Read all the safety notices below before using the LED Lighting Driver. • Avoid high humidity or extreme temperatures. •...