Page 1
SMART LED DRIVER INPUT: 100-277VAC 0.40A 50/60Hz OUTPUT: 24-38VDC Max 950mA MAX current can be set by app ta: 40ºC tc: 85ºC SLC613 LED Lighting Driver Dimming/CCT Quick Start Guide...
Introduction SMART LED DRIVER INPUT: 100-277VAC 0.40A 50/60Hz OUTPUT: 24-38VDC Max 950mA MAX current can be set by app ta: 40ºC tc: 85ºC The LED Lighting Driver allows you to remotely control your lighting or even apply schedules for automatic switching from mobile phone. This guide will provide you with an overview of the product and help you get through the initial setup and installation.
Page 3
3.1 To get started, you will need: A Gateway The mobile app 3.2 Installation The in-wall switch must be installed by qualified electrical personnel, keep the wiring diagram below for future reference. SMART LED DRIVER INPUT: 100-277VAC 0.40A 50/60Hz OUTPUT: 24-38VDC Max 950mA MAX current can be set by app ta: 40ºC...
Page 4
3.3 Connect to the gateway’s network 1. Set your gateway to permit joining. 2. The LED panel light connected to the LED Lighting Driver will start flashing after installation indicating it is ready to join the gateway's network. 3. The LED Lighting Driver will join the gateway automatically and the LED panel light will turn steady when successfully joined.
Safety Notice WARNING: Failure to follow these safety notices could result in fire, electric shock, other injuries, or damage to the LED Lighting Driver and other property. Read all the safety notices below before using the LED Lighting Driver. • Avoid high humidity or extreme temperatures. •...