5.1 Monitor dimensions
E
5.2 Camera dimensions
N
6 System connections
6.1 Notice in mounting
•
Install the monitor in a location with at least 5 cm of free space around the monitor.
•
Install the wires so that they do not cling to or pinch.
6.2 Wire connections
1. Connect the power cable (red, power / black, earth) to the vehicles battery. Refer to the vehicle manual for further instructions.
2. Connect the blue and white excitation cables for example to the power wire of the blinker or reversing light.
3. Connect the camera to the monitor with the supplied cable.
•
Make sure all connections are properly connected.
7 Menu
1
Blue
- TRIG 2
Red - Positive (+), power
White - TRIG 1
Black - Negative (-), grounding
2
3
4
1705-00006
207mm
50mm
1. Power switch
2. Arrow buttons LEFT/ RIGHT
3. MENU
4. Arrow buttons up / down
Picture settings:
•
brightness
•
contrast
•
color
Turn the monitor on by pressing switch 1
1. Press MENU (3), until screen shows Picture settings.
2. Choose Picture from a list by pressing Menu (3) button.
3. Adjust brightness, color or contrast on scale 1-100 by pressing
arrow buttons.
13
(2). Default value is 50.