Table of Contents
Advertisement
Available languages
Available languages
1 Safety and operation
1.1 Storaging instructions
•
Storage temperature is -30...+80
•
Operating temperature -20...+65
•
Maximum humidity is 90% Rh.
•
The monitor is not waterproof
•
Don't expose monitor to humidity, dust, oil etc.
•
Don't use the system in places where it is exposed to vibrations or powerful shocks.
1.2 Operation
•
Use only 12–24 V car battery or elctric system for a power source to the system.
E
•
Disconnect the power cord if you are not going to use the device for a while.
•
Follow all the given operating instructions.
•
Don't look at the monitor picture unnececcarily while driving.
N
1.3 Maintenance
1.4 Certificate of conformity
•
This device fulfills the demands of FCC regulation Part 15. Using the device requires fulfil-
ling the following terms:
•
The device must not cause harmful interference.
•
The device must withstand all the received interference including the ones that can lead to
faulty operation.
This symbol indicates that the documentation contains important instructions for proper use and maintenance of the system.
This symbol indicates that the electrical equipment or batteries should not be thrown away with household waste. Alternative-
ly use local landfill to dispose of the material in a correct way.
2 Features and technical details
•
7" High Resolution Color TFT- LCD monitor
•
8V-32V DC power input
•
ESD protection
•
Protection against reverse connection of the wires
•
Monitor OSD menu can set each camera image in 4 mode NOR/MIR/UP/DOWN; the priority for each channel (Each channel with a trig-
ger can connect with reversing / right / left trig).
•
Finds picture automatically, time delay setting 0~30s.
•
2 channels for camera input.
•
Waterproof classification of the camera: IP69K
2.1 Monitor technical Specification
Dimensions L x W x D (active area)
Display device
Resolution
Video Inputs
View angle
Response time (ms)
Load dump
Operating voltage range
Power Output
Operating temperature
Storage temperature
C
o
C.
o
Maintenance
•
Only an electrician is allowed to repair the device. If the backview camera system fails:
•
Switch off the monitor
•
Disconect the wires from the monitor
•
Contact to the system dealer or take it to authorized service center.
Cleaning the device
1. Unplug all the wires connected to the monitor before maintenance or cleaning.
2. Clean the system using mild multi-purpose cleaner and damp, soft cloth.
1705-00006
218 x 149 x 82 mm (153.60×86.64)
7" Color TFT-LCD (16:9)
800 x (RGB) × 480
2 channels
Up: 50°/ down: 70°, right/left: 70°
25ms
DC 12+87V/400ms
DC 11~32V (5W Max)
Max 12W
-20
C ... +70
C
o
o
-30
C ... +80
C
o
o
11
Advertisement
Table of Contents
