Table of Contents
Advertisement
2 ) Connect the external wiring to the appropriate terminals according to "6.3.1 Specification". Refer
to Figure 6 for the earth terminal location and Figure 10 for the wiring diagram.
3 ) Hang the cover with a cable tie on the base, and main board connector connect to CN3 of terminal
board (See Figure 7).
Figure 7 - Connection between main board and terminal board
4 ) Attach the cover to the base and align the binding band insertion slot (See Figure 8).
Figure 6 - Earth terminal
Figure 8 - Attaching the cover
8／13
ES1666
Advertisement
Table of Contents
