Operating Your Wine Chiller - Kadeka KA24WR Instruction Manual

The Wine Chiller should be placed in where the ambient temperature is below 35°C. If the ambient temperature
is above this range, the performance of the unit may be affected and may cause interior temperatures to
fluctuate. The range of setting temperatures may not be reached.

The controls of your Wine Chilller
For KA24WR
The temperature setting can be adjusted from 5°C ~18°C.

"RUN"
Indicator light illuminates to signify the cooling mode is currently in operation.

"LIGHT" Button
To control the inner light turn on/off.

"ON/OFF" Button
To control this appliance turn on/off (press and hold this buttons for approximately 3 seconds).

"UP" Button
Used to raise(warm) the temperature in 1℃.

"DOWN" Button
Used to lower(cool) the temperature in 1℃.

ON/OFF Power and memory function
To turn the Wine Chiller ON or OFF, press and hold the power button for 2 seconds. The LED readout will
show the last set temperature.

Setting The Temperature Controls

Set the desired cooling temperature by pressing the buttons adjacent to the "UP/DOWN" program. Each
depression of the buttons will scroll through the available temperature setting in increments of 1 degree.
The temperature selected will flash in the LED display for approximately 5 seconds, then revert back to
display the temperature of the internal cabinet.

To view the "set" temperature, (anytime) press and hold the corresponding button for approximately 5
seconds, the "set" temperature will temporarily "flash" in the LED display for 5 seconds.

Flashing LED = Set Temperature
Steady LED = Cabinet Temperature

OPERATING YOUR WINE CHILLER

7