Required Materials - sparkfun NEO-M8P-2 Hook-Up Manual

This will provide a great stress relief for the antenna connection. Now attach your SMA antenna of choice.

Be Careful! U.FL connectors are easily damaged. Make sure the connectors are aligned, flush face to
face (not at an angle), then press down using a rigid blunt edge such as the edge of a PCB or point of a small
flat head screwdriver.
If you're indoors you must run a SMA extension cable long enough to locate the antenna where it has a clear view
of the sky. That means no trees, buildings, walls, vehicles, or concrete metally things between the antenna and the
sky. Be sure to mount the antenna on a 4"/10cm metal ground plate to increase reception.
Connecting the GPS-RTK to a Correction Source
Before you go out into the field it's good to understand how to get RTCM data and how to pipe it to the GPS-RTK.
For this example we will show how to get correction data from the UNAVCO network, pull that data in using
RTKLIB, and pipe it down over serial to the GPS-RTK.

Required Materials

1x GPS-RTK
1x GPS or GNSS Antenna