Safety Instructions - Silvercrest SSMC 600 B1 Quick Start Manual

Safety instructions

DANGER! ELECTRIC SHOCK!
Ensure that the appliance, the power cable and the power
►
plug are never immersed in water or other liquids.
Use the appliance only in dry rooms; never use it outdoors
►
or in damp environments.
Ensure that the power cable never becomes wet or damp
►
during operation. Route the power cable in such a way that
it cannot become trapped or damaged in any way.
Arrange for defective power plugs and/or cables to be
►
replaced as soon as possible by a qualified technician or by
our Customer Service Department to avoid the risk of injury.
Always remove the plug from the power socket after use.
►
Switching off the appliance is not sufficient because the
appliance receives power as long as the power plug is
connected to the socket.
Check to ensure that the appliance is in a serviceable
►
condition before use. The appliance may not be used if it
shows signs of damage, especially to the motor block or the
blender attachment.
Remove the plug from the socket immediately if you notice
►
unexpected smells or noises coming from the appliance
while it is in use or if there is an evident malfunction.
WARNING! RISK OF INJURY!
NEVER insert your hand or fingers into the blender, especially
►
when it is in use. The cutting blades are extremely sharp!
DO NOT remove the lid when the appliance is in operation.
►
To ensure you can react immediately in the event of danger,
►
never leave the appliance running unattended.
Do not insert cutlery items or mixing tools into the blender while
►
the appliance is in use. There is a considerable risk of injury if
these come into contact with the swiftly rotating cutting blades!
SSMC 600 B1
GB │ IE │
3 ■