Product Name: Wireless No-Touch Forehead Thermometer Product Model: PT3SBT Indication for use The Wireless No-Touch Forehead Thermometer is intended for the intermittent measurement of body temperature from the forehead on people of all ages. It can transmit the temperature to a smart device with Bluetooth and can be used by consumers in the household environment and by healthcare providers.
Page 4
such tissues will affect temperature conduction of the body. 7. If there is a temperature difference between the thermometer storage area and the new ambient environment around the subject, please let the thermometer sit within the new environment for 30 minutes before taking the measurement.
Page 5
3. Do not directly touch the probe with your fingers or blow on it. Measurements taken using a damaged or dirty IR probe may be inaccurate. 4. Keep the product at a place inaccessible to children to prevent children from swallowing the batteries or small parts.
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
LED screen instructions Device dimensions: 5.39 in x 1.34 in x 1.54 in Screen dimensions: 1.01 in x 0.75 in Product weight: 90 g Product performance 1. Measurement position: Centre of the forehead surface 2. Measurement distance: ≤1.18 in(3 cm) 3.
ASTM laboratory accuracy requirements in the display range of 37 to 39°C (98 to 102°F) for IR thermometers is ± 0.2 °C ( ± 0.4°F), whereas for mercury-in-glass and electronic thermometers, the requirement per ASTM Standards E667-86 and E1112-86 is ±0.1 °C (±0.2°F). Expected use and scope of applications This product mainly uses infrared sensors to measure the temperature of the human forehead and transmit the temperature to a smart device with Bluetooth.
Page 9
② Gently press the measurement button to start the measurement. ③ The device will vibrate once a reading is obtained. Once the measurement is successful, the reading will be displayed on the screen. The whole time is about 1s. If the measurement is failed, the device will not vibrate the screen but display instead.
Page 10
(4) Unit switching 1. When the device is powered OFF, press and hold the measurement button for 8 seconds to enter unit switching mode. Under this mode, both ℃ and ℉ should flash at the same time. 2. Under this mode, press the measurement button to switch to Fahrenheit or Celsius.
Update the firmware of PT3SBT If a new version of the PT3SBT’s firmware is released, the iHealth App will inform user to update when the PT3SBT is connected to the smart device with Bluetooth. User can choose whether to update this version of the PT3SBT’s firmware, but it is strongly recommended to do this updating to get a better experience.
NOTE: During the upgrade process, the Bluetooth icon on the thermometer is always on and the three horizontal bars are displayed in cycles. Product errors and troubleshooting Problem Item to detect Solution Battery depleted Replace old batteries with new ones ...
healthy forehead temperature to correctly determine the temperature. Body temperature runs approximately from 95.9°F to100°F(35.5℃-37.8℃). To determine if one has a fever, compare the temperature detected with the person's normal temperature. A rise over the reference body temperature of 1.8℉(1℃) or more is generally an indication of fever. ...
Maintenance 1. This company has not authorized any agency or individual to carry out product repairs or maintenance. Do not attempt to disassemble or modify the thermometer if you suspect functional issues with the device. 2. The IR thermometer is an extremely precise instrument. Any improper maintenance, disassembly, or modification may lead to inaccuracies of the product measurements.
Labs Inc. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. And any use of such marks by iHealth Labs, Inc. is under license. Calibration The thermometer is initially calibrated at the time of manufacture. If this thermometer is used according to the use instruction, periodic re-adjustment is not required.
(Medical electrical equipment -- Part 1: General requirements for basic safety and essential performance), IEC 60601-1-2:2014(Medical electrical equipment -- Part 1-2: General requirements for basic safety and essential performance - Collateral standard: Electromagnetic compatibility - Requirements and Tests), ISO 80601-2-56:2017/AC:2018( Medical Electrical Equipment -- Part 2-56: Particular Requirements For The Basic Safety And Essential Performance Of clinical thermometers...
4. Liability for direct or indirect consequential losses caused by the unit is excluded even if the damage to the unit is accepted as a warranty claim. Manufactured for iHealth Labs Inc. 120 San Lucar Ct., Sunnyvale, CA 94086, USA...
Page 18
This product can be used across EU member states. EU Regulatory Conformance Hereby, iHealth Labs Inc. declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. For the declaration of conformity, visit the Web site https://www.ihealthlabs.com.
Need help?
Do you have a question about the PT3SBT and is the answer not in the manual?
Questions and answers