Advertisement
Quick Links
Star Bright Chest of Drawers
Assembly Difficulty
two-person job
easy -
medium
- hard
Thank you for shopping with GLTC, we hope you enjoy
having this product in your home.
We know assembling furniture, toys or accessories is not everyone's
favourite way to spend their time, so we've tried to make assembling
this item as quick and painless as possible.
Hopefully our efforts will have been worthwhile and you'll sail
through the whole process. But if it all feels a bit too much
like hard work, then we do have an assembly company we
can recommend: the Flatpack Construction Company offers a
nationwide service and can be contacted on 0843 289 4951 or
www.flatpackconstruction.co.uk.
A few important pointers before you start:
•
Please read the instructions right through before you start, and check
that all the components have been included in the pack; we find
separating all the hardware into piles makes it easier to be sure that
everything is present and correct.
•
Make sure you have the right tools. Allen keys are provided if required,
but screw drivers and other tools are not. You'll find details of the tools
you need at the beginning of the instructions.
•
It's a good idea to build the unit in the room where you are going to be
using it, to avoid the need to move it after it's been assembled.
•
Do not throw away any packing materials until assembly is complete,
just in case you accidentally discard smaller parts or hardware.
V5
02/08/2019
1
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Great Little Trading Star Bright Chest of Drawers
Summary of Contents for Great Little Trading Star Bright Chest of Drawers
- Page 1 Hopefully our efforts will have been worthwhile and you’ll sail Star Bright Chest of Drawers through the whole process. But if it all feels a bit too much like hard work, then we do have an assembly company we...
-
Page 2: Safety Warnings
Safety Warnings: Customer Service: • Adult assembly required. • If you find that any components are missing or damaged, please do not begin assembly and do not use the item. Please contact GLTC • Unassembled product contains small parts which may present a Customer Services on 0344 848 6000 immediately. -
Page 3: Component Checklist
Component Check List Component Check List Component Check List x1 Top Drawer Divider Panel x1 Horizontal Divider Panel x4 Drawer RH Sides x2 Large Drawer Backs x1 LH Side Panel x1 Lower Drawer Divider x2 Large Drawer Base Panels x1 LH Small Drawer Front x1 RH Side Panel x1 Base Plinth x1 RH Small Drawer Front... - Page 4 Component Check List Assembly: POSITION 1 POSITION 2 Ensure that this hardware hole closest to the short edge is at x4 #1 Flat Runner x4 #2 Flat Runner the top. x4 RH L-Shaped Runners x4 LH L-Shaped Runners x20 Wooden Dowels x18 Screws 20mm 25mm...
- Page 5 Hardware for Step 2: Hardware for Step 3: 2x #5 Wooden Dowels 3x #1 Flat Runners 2x #6 Screws 25mm 3x #7 Cam Dowels The small drill holes on the 9x #12 Screws 12mm edge of Panel B to be facing up. BASE Use the smaller holes when attaching the runner.
- Page 6 Hardware for Step 4: Hardware for Step 5: 3x #2 Flat Runners 4x #5 Wooden Dowels 3x #7 Cam Dowels 3x #8 Cam Locks 9x #12 Screws 12mm BASE Use the smaller holes when attaching the runner. Start with the first small next to the wheel.
- Page 7 Hardware for Step 6: Hardware for Step 7: 4x #5 Wooden Dowels 4x #5 Wooden Dowels 4x #9 Barrel Nuts 3x #8 Cam Locks 4x #10 Bolts 42mm BASE Rounded corners to face the floor. STEP 7: Please note: two people required for this step. Insert 4x barrel nuts (#9) and 4x wooden dowels (#5) into the ends of panels (E) STEP 6: Secure the second side panel (E ) by inserting 4x wooden dowels (#5) and (C) and with the help of the second person slot base plinth (F) in position to the...
- Page 8 Hardware for Step 8: Hardware for Step 9: 6x #7 Cam Dowels 6x #5 Wooden Dowels 6x #8 Cam Locks Rounded corners to face the floor. STEP 8: Locate top panel (G) and insert 6x cam dowels (#7). STEP 9: Insert 6x wooden dowels (#5) to the top panel (G) and slot into the unit ensuring that the grooved edge is facing up.
- Page 9 Hardware for Step 10: Hardware for Step 11 12x #11 Screws 16mm 8x #7 Cam Dowels STEP 10: Locate 2x back panels (H) and place within the recessed groove of the STEP 11: Prepare the large drawers by inserting 4x cam dowels (#7) to large panels ensuring that the pilot holes on panels (H) line up with the pilot holes in the drawer front (I).
- Page 10 Hardware for Step 12: Hardware for Step 13: 4x #4 L Shaped Runner 4x #3 L Shaped Runner 12x #12 Screws 12mm 12x #12 Screws 12mm STEP 12: Locate 4x LH drawer side panels (J) and secure runner (#4) with 3x STEP 13: Locate 4x RH drawer side panels (K) and secure runner (#3) with 3x screws (#12) where indicated.
- Page 11 Hardware for Step 14: Hardware for Step 15 4x #6 Screws 25mm 4x #6 Screws 25mm 4x #8 Cam Locks 4x #8 Cam Locks STEP 14: Construct the large drawer by attaching side panels (J and K) to the large drawer back panel (L) as shown with 4x screws (#6).
- Page 12 Hardware for Step 16: Hardware for Step 17 4x #6 Screws 25mm 8x #7 Cam Dowels 4x #8 Cam Locks STEP 17: Construct drawer N by attaching side panels (J and K) to back panel (Q) as shown with 4x screws (#6). Ensure that the runners are on the outer side of the side panels and that the wheels on the runners are at the back of the drawer.
- Page 13 Hardware for Step 18 4x #6 Screws 25mm 4x #8 Cam Locks STEP 18: Repeat step 17 to create the second small drawer attaching drawer front STEP 19: Insert 4x drawers as shown ensuring that the small drawer (O) is on the panel (O) left hand side and drawer (N) is on the right hand side on the top level.
- Page 14 Please refer to the instructions in the kit provided for further guidance. Copyright© 2016 G.L.T.C. Ltd. All rights reserved. Great Little Trading Company and GLTC are registered trade marks of G.L.T.C. Limited.
Need help?
Do you have a question about the Star Bright Chest of Drawers and is the answer not in the manual?
Questions and answers