Advertisement
Townhouse Toy Box
L4769
Assembly Difficulty
one-person job
easy -
medium
- hard
Thank you for shopping with GLTC, we hope you enjoy
having this product in your home.
We know assembling furniture, toys or accessories is not everyone's
favourite way to spend their time, so we've tried to make assembling
this item as quick and painless as possible.
Hopefully our efforts will have been worthwhile and you'll sail
through the whole process. But if it all feels a bit too much
like hard work, then we do have an assembly company we
can recommend: the Flatpack Construction Company offers a
nationwide service and can be contacted on 0843 289 4951 or
www.flatpackconstruction.co.uk.
A few important pointers before you start:
•
Please read the instructions right through before you start, and check
that all the components have been included in the pack; we find
separating all the hardware into piles makes it easier to be sure that
everything is present and correct.
•
Make sure you have the right tools. Allen keys are provided if required,
but screw drivers and other tools are not. You'll find details of the tools
you need at the beginning of the instructions.
•
Do not throw away any packing materials until assembly is complete,
just in case you accidentally discard smaller parts or hardware.
V1
12/06/2019
1
Advertisement
Table of Contents
Related Manuals for Great Little Trading L4769
Summary of Contents for Great Little Trading L4769
- Page 1 Hopefully our efforts will have been worthwhile and you’ll sail Townhouse Toy Box through the whole process. But if it all feels a bit too much L4769 like hard work, then we do have an assembly company we can recommend: the Flatpack Construction Company offers a nationwide service and can be contacted on 0843 289 4951 or www.flatpackconstruction.co.uk.
-
Page 2: Safety Warnings
Safety Warnings: Customer Service: • Please read these instructions carefully before assembly. • If you find that any components are missing or damaged, please do not begin assembly and do not use the item. Please contact GLTC • Adult assembly required. Customer Services on 0344 848 6000 immediately. -
Page 3: Component Checklist
Component Check List 14x Cam Dowels 14x Cam Locks 2x Surround Sides 1x Surround Central Divider 36mmL 14mm dia 12x Screws 18x Wooden Dowels 25mmL 2x Surround Small Dividers 1x Surround Base Panel 20mmL 16x Screws 4x Wheels 1x Surround Back Panel 1x LH Surround Side Panel 10mmL You will need... - Page 4 Hardware for Step 1: Hardware for Step 2: 1x #1 Cam Dowel 1x #1 Cam Dowel 1x #2 Cam Lock 1x #2 Cam Lock 5x #3 Wooden Dowels 5x #3 Wooden Dowels STEP 1: STEP 2: Take 1x panel A and using a Phillips screwdriver, insert 1x cam dowel (#1) into the hole nearest the top point of the triangular panel.
- Page 5 Hardware for Step 3: Hardware for Step 4: 4x #4 Screws 25mmL 2x #1 Cam Dowel 2x #3 Wooden Dowels 2x #2 Cam Lock BASE Use the outer holes for the screws in this step. STEP 4: STEP 3: Insert 2x cam dowels (#1) into the remaining inner holes on the base panel D. Insert 2x wooden dowels (#3) into the central holes of BOTH panels A as shown.
- Page 6 STEP 5: STEP 6: Insert 2x wooden dowels into the inner holes on the end/edge of the base Repeat step 5 for panel J. panel (D). Remember to tighten the cam locks (#2) at both ends inside the top of the Take panel F and using a Phillips screwdriver, insert 5x cam dowels into the storage unit.
- Page 7 STEP 7: STEP 9: Hardware for Step 7: Create the drawer. Slide base panel K into the grooves. Take panels G and H and line up the grooves as shown. 2x #4 Screws 25mmL Connect together using 2x screws (#4). STEP 8: STEP 10: Hardware for Step 8:...
- Page 8 Turn the drawer over when complete. #5 x4 #5 x4 #5 x4 #5 x4 Hardware for Step 11: 16x #5 Screws 10mmL Copyright© 2019 G.L.T.C. Ltd. All rights reserved. Great Little Trading Company and GLTC are registered trade marks of G.L.T.C. Limited.
Need help?
Do you have a question about the L4769 and is the answer not in the manual?
Questions and answers