Advertisement

Quick Links

Lollipop Kitchen
L4011
Assembly Difficulty
two-person job
easy
- medium - hard
Thank you for shopping with GLTC, we hope you enjoy
having this product in your home.
We know assembling furniture, toys or accessories is not everyone's
favourite way to spend their time, so we've tried to make assembling
this item as quick and painless as possible.
Hopefully our efforts will have been worthwhile and you'll sail
through the whole process. But if it all feels a bit too much
like hard work, then we do have an assembly company we
can recommend: the Flatpack Construction Company offers a
nationwide service and can be contacted on 0843 289 4951 or
www.flatpackconstruction.co.uk.
A few important pointers before you start:
Please read the instructions right through before you start, and check
that all the components have been included in the pack; we find
separating all the hardware into piles makes it easier to be sure that
everything is present and correct.
Make sure you have the right tools. Allen keys are provided if required,
but screw drivers and other tools are not. You'll find details of the tools
you need at the beginning of the instructions.
It's a good idea to build the unit in the room where you are going to be
using it, to avoid the need to move it after it's been assembled.
Do not throw away any packing materials until assembly is complete,
just in case you accidentally discard smaller parts or hardware.
V1
03/11/2016
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Lollipop Kitchen L4011 and is the answer not in the manual?

Questions and answers

Summary of Contents for Great Little Trading Lollipop Kitchen L4011

  • Page 1 Thank you for shopping with GLTC, we hope you enjoy having this product in your home. We know assembling furniture, toys or accessories is not everyone’s favourite way to spend their time, so we’ve tried to make assembling this item as quick and painless as possible. Hopefully our efforts will have been worthwhile and you’ll sail Lollipop Kitchen through the whole process.
  • Page 2: Safety Warnings

    Safety Warnings: Customer Service: • Adult assembly required. • If you find that any components are missing or damaged, please do not begin assembly and do not use the item. Please contact GLTC • Unassembled product contains small parts which may present a Customer Services on 0344 848 6000 immediately.
  • Page 3: Component Checklist

    Component Check List You will need (not supplied) Phillips Head 1x Anti-Tip Strap Screwdriver 4x Short 10x Medium 24x Long 1x Door 1x Door Screws Screws Screws Catches Catches 8mmL 16mmL 21mmL 25x Barrel Nut 25x Barrel Nuts Bolts 7mm dia 40mmL...
  • Page 4: Drawer Assembly

    Drawer Assembly Drawer Assembly STEP 3: Attach drawer front (E) to panels D and C using 4x long screws (#5). Hardware for Step 1: Hardware for Step 3: 4x #6 barrel nuts STEP 1: Attach panels C and D to panel A using 4x barrel nuts and 4x #5 21mmL screws 4x #7 barrel nut bolts bolts.
  • Page 5 Soap Drawer Assembly Hardware for Step 5: Soap Drawer Assembly Hardware for Step 7: 4x #4 16mmL screws 4x #4 16mmL screws STEP 5: STEP 7: Attach panel G to panels I and J using 4x medium Push the part assembled drawer through the hole. Now slot the soap drawer screws (#4).
  • Page 6 Worktop Assembly Hardware for Step 9: Back Panel Assembly Hardware for Step 11: 6x #5 21mmL screws 2x #5 21mmL screws STEP 9: STEP 11: Attach the x6 pegs (O) to the front face of panel N, using 6x long screws (#5). Now attach tap section (S) to the worktop (R) using 2x long screws (#5).
  • Page 7 Hardware for Step 13: Hardware for Step 15: 2x #6 barrel nuts 2x #6 barrel nuts 2x #7 barrel nut bolts 2x #7 barrel nut bolts STEP 13: STEP 15: Secure dividing panel T to panel X using 2x barrel nuts and bolts. Secure right hand side panel (U) to base panel V using 2x barrel nuts and bolts.
  • Page 8 Hardware for Step 19: Hardware for Step 17: 4x #6 barrel nuts 4x #6 barrel nuts 4x #7 barrel nut bolts 4x #7 barrel nut bolts View of STEP 19: panel Z from Position panel Z between the other side panels T and U, secure this panel using 4x barrel nuts and bolts.
  • Page 9 STEP 21: Position panel L into the dowel holes on panels M and U, at the same time ensure the top oven door hinge goes into the hinge hole on panel L. With panel L in position, now fully tighten the right hand side barrel nuts and bolts on panel U.
  • Page 10 Secure into place using 4x barrel nuts and bolts. Now secure the backboard in place using 2x barrel nuts and bolts. Copyright© 2017 G.L.T.C. Ltd. All rights reserved. Great Little Trading Company and GLTC are registered trade marks of G.L.T.C. Limited.

Table of Contents