Advertisement
2.0 Setting Up Your SmartLink Network Account
11.
Complete the installation
by mounting the Aircard
next to the SmartLine
controller using the screws
provided in your accessory
bag. Make sure the Aircard
is mounted so the antenna
is facing downward, and
the controller door can
open fully.
2.0 Setting Up Your SmartLink Network Account
1.
Go to www.smartlinknetwork.com and click the "Login"
button at the top right of the screen. There you can
login to an existing account or create a new one. If you
already have an account, continue to Step 2. When
creating a new account, please fill out all required areas
marked with an asterisk (*). Note: Company Name is
required. If creating a personal account, use your name
in place of the company name.
2.
Once logged in, you will be taken to the Sites page.
Note: Sites are like "folders" that contain the SmartLine
or ProLine controller/s.
3.
You can begin by adding
a new Site or add the new
SmartLine controller to an
existing Site.
4.
To add a New Site for the
controller to be placed in,
click the "+Add New Site"
button at the top right of
the Sites page.
5.
Enter the Site name,
complete Address of the Site, Contact, Phone, Email,
and Owner.
6.
Click the Create Site button.
To add the new controller to your newly created Site or
existing Site.
7.
Select the Site where you want the new SmartLine or
ProLine controller to be place inside.
8.
Click "Add New Controller" and start by giving the
controller a Name.
2
http://support.weathermatic.com
Advertisement
