3Com WL-537 User Manual page 59

Dynamic IP Address
Figure 35 Connection Parameters Screen - Dynamic IP
If this mode is selected, your IP Address, Subnet Mask, and DNS Address
will be obtained automatically from your ISP. They are not displayed on
this screen, but may be viewed on the Status screen (click on Status and
Logs on the left hand menu bar).
To setup the Router for use with a dynamic IP address connection:
1 Select Dynamic IP Address (automatically allocated) in the IP Allocation
Mode field.
2 Enter the Host Name(optional).
Some ISP srequire a host name. If your ISP has this requirement, enter the
host name in the Host Name text box.
3 If you use 'Cable', your ISP may use your MAC address to authenticate
you. If this is the case, you will need to 'Clone' your MAC address. There
are three options:
Use the Router's original Internet MAC address - This field is selected
■
by default and is automatically filled in with the MAC address of the
Router.
LAN Settings 63